Takeuchi TB175, Operator'S Manual, Page: 101 / 231

98
MAINTENANCE
Fuel and Lubricant Chart
Use different fuels, lubricants and greases according to the temperature, referring to the
chart below.
¡
Change the lubricant earlier than as shown in the table if it is extremely dirty or its
performance has deteriorated severely.
¡
Whenever possible, use the same brand of lubricant as before. If changing with a different
brand, replace the entire quantity – do not mix different brands.
* : If the percentage of the traveling time within the total operating time is high, replace the
gear oil earlier than the specified time.
** : For water, use tap water (soft). Do not use well or river water.
When the ambient temperature drops below 0
°
C, supply coolant (antifreeze). Follow the
coolant manufacturer’s instructions to determine the mixture ratio.
*** : Serial No. 17514412 ~
Service Data
Part
Type
Type by temperature
-22 -4 14 32 50 68 86 104
°
F
-30 -20 -10 0 10 20 30 40
°
C
Replacement
interval
Capacity
Lit. (US. qt.)
Engine
oil pan
Diesel
engine oil
API-CD
After first 50 hrs.
Every 250 hrs.
Upper limit:
10.2 (10.8)
Lower limit:
5.7 (6)
System:
132
(34.9 US.gal.)
Tank:
68 (18 US.gal.)
Hydraulic
tank
Antiwear
hydraulic oil
(Option:
Biodegradable
oil)
Every 2000 hrs.
Use a clean, Quality fuel for good performance and optimum engine life.
¡
To prevent fuel flow problems in cold weather, use diesel fuel with a pour point of
at least -12
°
C (10
°
F) below the lowest expected ambient temperature.
¡
Minimum cetane number is 45. Low temperature or high altitude operation may
require the use of fuel with a higher cetane number.
Fuel tank Diesel fuel
120
(31.7 US.gal.)
Engine
cooling
system
Coolant
(water +
coolant)**
Every 1000 hrs.
9.5 (10)
11.2 (11.8)***
SAE 5W-20
SAE 10W-30
SAE 15W-40
Travel
reduction
gear
Gear oil
API-GL-4
SAE 90
After first 250 hrs.*
Every 1000 hrs.
Slew
bearing
Working
equipment
Levers
Lithium
based
grease
EP-2
NLGI No. 2
Every 50 hrs.
Daily or every
10 hrs.
When required
As
required
1.5 (1.6)
ISO VG32
ISO VG46
ISO VG68
50% coolant mixture
30% coolant mixture