![background image](http://html2.mh-extra.com/html/takeuchi/tb-250/tb-250_workshop-manual_3331249349.webp)
5-58
5
AIR CONDITIONER
TROUBLESHOOTING
B. Compressor clutch does not engage
Note:
1. After completion of repair work, make sure to reinstall the connectors removed for inspection.
2. Checking the items marked with * is not possible unless you have added refrigerant to the system and the ambient
temperature is at least 2°C.
Turn off the starter switch and remove Connector (13)
from the compressor
Turn on the starter switch, set the fan switch to 1, 2 or 3,
and set the temperature control dial to COOL
※
Measure the voltage between the female bullet con-
nector and ground connected to the compressor. Is it
10-15V?
YES
C o m p r e s s o r
clutch is faulty
Repair or replace the compressor
NO
※
Turn off the starter switch and remove Connector (12).
Check the pressure switch of the receiver-dryer for con-
tinuity. Is there continuity?
NO
Pressure switch is
faulty
Replace the receiver-dryer
YES
Is the compressor normal?
NO
Relay or relay cir-
cuit is faulty
Replace the relay
YES
Is the voltage “0V” between the blue/red and ground of
Connector (4)?
NO
Blower switch is
faulty
Replace the blower switch
YES
Is the evaporator sensor normal?
(see the description for checking the evaporator sen-
sor)
NO
Evaporator sensor
cord or evaporator
sensor is faulty
Repair the evaporator sensor cord or
replace the evaporator sensor
YES
Control amplifier
is faulty
Replace the control amplifier
Summary of Contents for TB 250
