M10510B;45/58
- 45 -
Feature (Item)
Content (Set value)
Read/
Write
<AnalogControls>
GainRaw
Sets the gain set value in MGC mode. (0 to 255)
R/W
GainAuto
Sets the AGC operation
R/W
Off : AGC = OFF
Continuous : AGC = ON
AgcGainRaw
Sets the gain set value in AGC mode. (0 to 255)
R/W
BlackLevelRaw
Sets the black level (Image offset level) (0 to 255)
R/W
<UserSets>
UserSetSelector
Selects the destination to do UserSetSave.
R/W
Default
:
Selects the factory default.
UserSet1: Selects the first user set.
UserSetSave
Saves the set contents to the destination specified by
UserSetSelector.
(Note) Can not be saved to Default.
C
UserSetDefaultSelector
Selects the destination to load at start-up.
the feature User Set to load and make active when the device is reset.
R/W
Default
:
Selects the factory default.
UserSet1: Selects the first user set.
<TakexCameraControls>
FcTestImage
Displays the test pattern output from camera block.(BW gray scale)
R/W
Off: Display OFF
On: Display ON
FcMenu
ON/OFF of OSD menu display
R/W
Off: Display OFF
On: Display ON
FcPageSelector
Selects the page of FcSavePage and FcLoADPage
R/W
FcSaveCfg
Saves the current configuration flag set value of the camera.
C
FcSavePage
Saves the set contents of the camera.(Specified by FcPageSelector)
C
(Note) it boots up at next start-up in accordance with the contents of FR and CR (common
for each page) saved in the page (Page A as default)specified by hypothetical mode SW.
FcLoadPage
Loads the set contents of the program page of the camera.
(Page is specified by FcPageSelector)
C
FcModeSW (EX)
Changes the set value of hypothetical mode SW
R/W
PositionA : Sets the hypothetical mode SW to A
PositionB : Sets the hypothetical mode SW to B
…
PositionF: Sets the hypothetical mode SW to F
(Note) Changed contents are saved and remains effective at next power-on.
FcShutterSW
Changes the set value of hypothetical shutter SW
R/W
Position0 : Sets the hypothetical shutter SW to 0
Position1 : Sets the hypothetical shutter SW to 1
…
Position9: Sets the hypothetical shutter SW to 9
(Note) Changed contents are saved and remains effective at next power-on.
[E
xplanatory note]
Items indicated by
bold face : The custom feature or custom value of TAKENAKA’s product.
Items indicated by
italic face : Accompanied by writing/rewriting to the nonvolatile ROM inside the camera.
Items indicated by (Ex) : Visibility is defined in Expert.
Read/Write : R/W (Read/Write), R (Read only). C (Command)