manualshive.com logo in svg

Takenaka System FC2200GE, Instruction Manual, Page: 20 / 58

Share
Download
Takenaka System FC2200GE Instruction Manual Download Page 20

M10510B;20/58 

- 20 - 

6.    Operation by Image display software 

 

Operation examples for changing camera settings using Image display demonstration software in attached SDK (Software   
development kit) are described in this section 

→

  Refer to “FC-GE series camera Instruction manual (Connection edition)” of separate volume for the details about the installing 

method of SDK or the specific procedure for executing image display with the camera being connected to PC. 

 

(6-1)  Image display software in attached SDK 

Image  display  demonstration  software  “GEVPlayer”(eBUS-PureGEV  Packge)  and  ”COyote”(eBUS-Vision  Package)  become 
available  by  connecting  the  camera  to  PC  via  Ethernet  and  by  installing  attached  SDK  (“eBUS-PureGEV  Packge”  and  ” 
eBUS-Vision Package”). 
It can display the image on PC monitor and can save the image data using these Image display demonstration software. 

→

  Refer to “FC-GE series camera Instruction manual (Connection edition)” of separate volume for the details about the installing 

procedure and the usage of these display software (“GEVPlayer” and ”COyote”). 

 
 
 
 

<GEVPlayer Display screen>

<Coyote Display sc reen>

[Important] Regarding SDK selection at the time of development of application software 
 
This equipment adopts the Pleora (Canada)’s iPORT as IP engine. 
“eBUS-PureGEV  Packge“(GenCam  API-compliant  development  environment)  and  “eBUS-Vision  Package”(non-GenCam  API-compliant) 
are available as SDK in iPORT. 
Although  “eBUS-Vision  Package”  including  demonstration  display  software  “Coyote”  has  been  used  for  many  years,  Pleora  strongly 
recommends  to  use  “eBUS-PureGEV  Packge“(GenICam  API-compliant  development  environment),  as  a  trend  shifting  to  GenICam 
API-compliant cameras becomes more common among third-party image processing software makers and many GigE camera makers. 
 
Except  for  particular  reasons  that  iPORT  interface  or  application  software  has  been  developed  for  years  on  the  platform  of  Pleora’s 
“eBUS-Vision  Package”,  we  recommend  to  develop  the  new  application  software  using  “eBUS-PureGEV  Packge“  that  is  the  GenICam 
API-compliant development environment.

 

Summary of Contents for FC2200GE



























































Reviews:

No comments