M10510B;3/58
- 3 -
1. Features
●
FS5000GE is a full frame shutter color camera incorporated with 5-megapixel,2/3”-size CCD image sensor.
●
A full frame shutter image can be obtained at a rate of 5 frames per second.
●
Gigabit Ethernet is adopted as the output interface of image signal.
●
Image signal can be output at 12/10/8-bit resolution.
●
The internally set values of the camera can be externally controlled with serial communication via Ethernet.
●
Auto iris lenses can be used, as it is provided with a false image signal output to drive an auto iris lens.
●
The character information of the current setting status of the camera can be superimposed over the captured image on
the screen. (On Screen Display function)
●
The monitoring function for measuring the internal temperature of the camera.
●
The asynchronous shutter is applicable both in the preset shutter mode and the pulse width control mode.
●
The camera is designed so that the strobe signal can be output even in the continuous shutter mode, and this
contributes to the power saving for LED lighting and others as well as the reduction of smear.
(Note) “Ethernet” is a registered trademark of XEROX
2. Outline
Image sensor
Progressive scanning, interline
2/3 inch
Effective pixels
5 megapixels 2616 (H) × 1960 (V)
Read out
scanning
Horizontal
10.3 kHz
Vertical
5 Hz
Clock
32.5 MHz
Electronic shutter
1/8,600 to 1/5 second
(Continuous shutter / Asynchronous shutter)
Video output signal
Digital 12/10/8 bit
Gigabit Ethernet interface(GigE Vision compliant)
Scanning mode
Normal scan for all pixels (5 fps)
Partial scan for central area(10 fps)
Block diagram
ＣＣ Ｄ
CPU
Ａ ／Ｄ
ＯＦＦＳＥＴ
１２ ／ １０ ／ ８ ｂｉ ｔ
RJ-45 connector
Pr ea mp li fie r
ＧＡＩＮ
UART
S/H
SYNC
Vinit
G
ig
a
b
it
E
th
e
rn
e
t
IP
E
N
G
IN
E
RXD
TXD
Viint
STRB
D
R
IV
E
R
FPGA
SYNC etc.
GigE I/F
IRIS
Analog Front-end
C
a
m
e
ra
L
in
k
I/
F
Genaration of
false image signal
for IRIS control
ＯＢ（Optical Black）
２
２６１６
４０
８
Effective image pickup area
Ｈ
Ｖ
１
９
６
０
１２
（
１
９
５
２
)
（２６０８）
４
４
[Explanation] Number of pixels
In this equipment,
Number of Total pixels: 2668(H)
×
1970(V) approx.5.26 megapixels
Number of Effective pixels: 2616(H)
×
1960(V) approx.5.13 megapixels
Number of Certified pixels: 2608(H)
×
1952(V) approx.5.02 megapixels
Where
Number of Total pixels: Number of pixels of whole area consisting of pixel elements on image sensor.
Number of Effective pixels: Number of pixels which is possible to be output as image signal.
Number of Certified pixels: Number of pixels of which output characteristics are assured.
respectively.
It is recommended to use the image signal output within the area of certified pixels in the case of application where image quality of peripheral
part is emphasized.