19
GB
09.02 Remote control
Display module
Yellow LED diode
Green LED diode
Red LED diode
Yellow LED diode
■
fl
ashes when disinfection is required
Green LED diode
■
Whirltub ready to work/standby, i.e. the minimum water level has been reached
Red LED diode
■
fl
ashes during disinfection process
■
fl
ashes while disinfection process is active which means that the reservoir is empty (only in case of
automatic disinfection - additional accessories)
■
It pulses after
fi
nishing the disinfection and signals that the bathtub should be emptied
⚠
You can select the desired function from the remote control by short pressing of the appropriate button. A desired
function is activated within 1-2 seconds after pressing the button.
10
Exchange of batteries
11 Dry-run
protection
Your whirltub is equipped with dry-run protection. The pump, the lighting
or the disinfection function can be started only when the green LED
diode is on. The dry-run protection constitutes a protection against
starting the system when the bathtub is empty or the water level is too
low.
Upper edge of
the nozzle located
the highest
Minimum height
of water level
Minimum height of water level
1
3
4
5
6
7
8
9
11
10
2