Takara Belmont YUME ESPOIR Installation Instructions Manual Download Page 8

8

Carrying the main body

Foot

part

Seat back

Base

Edge

Basin

Air mat

Main body 

cover

Protective tape

Protective tape

Precaution

 

• Never hold the main body cover. 

Doing so may cause damage to the main body cover.

• Take care when handling the basin as it is heavy and fragile.

• Do not drag the unit. 

The foot part of the basin is made of steel, so dragging it may 

damage the floor surface or crack the basin itself.

• The basin may become damaged if scratched by metallic objects 

such as watches or belts. 

Remove all metallic objects such as watches when carrying the 

basin.

• Take extra care to ensure not to damage the covers.

• Do not touch the basin body pipes. 

Doing so may cause water leaks.

•The basin is unstable when it is not fixed to the floor.

Precaution

 

• Never hold the backrest. 

Doing so may cause incorrect operation or malfunctions in the seat.

• Do not drag the seat. 

The feet of the seat are made of steel, so dragging it may damage 

the floor surface, damage the foot part, cause incorrect operation or 

malfunctions in the seat or toppling.

Precaution

 

Always have at least two people to carry the main body and hold the 

basin when remove the bold.

Carrying the basin

1  Unpack the wood frame.

2 Remove the maintenance cover from the main body.

Remove the protective tape and the Urea screws from the maintenance 

cover.

   * Remove the maintenance cover keeping the protective tape taped to    

     the main body cover.

3  Remove the main body from the wood frame.

Remove the screw attaching the base and skid while holding the basin. 

(4 points)

4  When carrying the basin

Do not take off the air mat and the protective tape.

Carry the body by holding the edge of under the basin. Do not hold the 

main body cover. Always have two at least people to carry the main 

body. (see image on right)

Carrying the seat

1  Unpack the wood frame.
2  Remove the seat from the wood frame.

Remove the screw attaching the foot part and skid while holding the 

seat. (4 points)

3  When carrying the seat

Hold the specified points only. (see page 7) 

Always have at least two people to carry the seat. (see image on right) 

Precaution

 

 

Do not lose the Urea screws holding down the maintenance cover.

The Urea screws are used for holding down the maintenance cover 

later. (see page 12)

Summary of Contents for YUME ESPOIR

























Reviews: