
16
Attach base cover
7
1 Remove the oil plug from the oil tank.
2 Attach base cover L and R to the seat
(1) Attach base cover L and R using screws as
shown in the image on the right. (M5 × 30, 4 pcs)
(Plastic washer (10 × 5), 4 pcs)
(M4 × 12, 1 pce)
* The plastic washers are supplied with the screws
when the product is shipped. Check that the plastic
washers have not come loose.
(2) Attach the clips to base cover L and R in four
locations. (clip, 4 pcs (2 each at the front and rear)
* Take note of the clip orientation when attaching
them.
2 Install base plate F to base plate H
Attach base plate F to base plate H with screws.
(Urea screws M6 × 12, 2 pcs, with rubber packing)
*The rubber packing is supplied with the screws when the product is
shipped. Check that the rubber packing has not come loose.
Precaution
Take care not to hit or trap other parts when installing the cover.
Doing so may damage the parts and cause malfunctions.
Precaution
• Always attach the plastic washers.
If the washers are not attached, water may leak
through, making it difficult to remove the screws.
• Take care that the main power switch is not
turned on when installing the cover.
If the foot switch is accidentally turned on, the
seat will start moving, and may cause accidents
or malfunctions to the main body.
Precaution
Always attach the rubber packing to the Urea screws.
Water may seek into the base plate from the screw attachment
holes, causing malfunctions to the main body.
Precaution
Attach the Urea screw by hand without using any tools. Using
tools may cause damage to the plastic section.
* Check that there is no damage or dirt on the cover before installing it.
If there are any problems found in preliminary checks, contact your closest dealer or Takara Belmont directly.
M5 × 30
Main power switch
Oil plug
Oil tank
Base cover L
Base cover R
M4 × 12
M5 × 30
Plastic washer
* Clip
attachment
position
* Clip attachment position
M5 × 30
Base cover L
Clip
Clip
Base cover R
Clip
Clip
Base cover R
Urea screw
Base plate F
Base plate H
Rubber packing