11
Attach piping
2
Precaution
Follow a local rule when you attach piping.
Prepare parts that suited the local statute if you need.
1 Attach drain hose to installed drain pipe
* Drain trap
If water leaks due to damage to the drain trap, contact your closest dealer
or Takara Belmont directly.
2 Attach the water supply pipe and hot water supply pipe
Precaution
• Check that the drain hose is not bent or damaged.
This may affect water flow or damage the drain hose.
• Check that the drain hose clamp is firmly fastened. If it is
not fastened, water may leak or the drain hose may come
loose.
• Check that the hose is not in the shape of an S trap. An S
trap can adversely affect the flow of drainage water. If the
drain pipe layout causes an S trap to be formed, check the
installation position of the basin body and piping
dimensions, and make the necessary adjustments.
Drain hose packing
Drain hose clamp
Drain hose
Fasten
Insert to this line.
Match the center (width) of drain hose
clamp to the indent in the drain hose.
* Firmly insert the drain
hose packing until it hits
the inner stepped section
of the drain hose.
Stepped section
End of drain pipe
Drain hose packing
(1) Install the drain hose packing
to the drain pipe joint.
drain pipe joint
(2) Pass the drain hose through the
drain hose clamp and attach
the drain hose.
(3) Fasten the drain hose clamp.
Drain hose
Drain hose clamp
Drain hose packing
Floor
Precaution
• Always connect the pipe after removing all contaminants on the pipe
such as dirt, sand and oil.
• Check that the space around the pipe is completely filled with caulking
materials.
・
Check that pipe installation suits product specifications
(position, pipe, height) and that it matches the pipe installation
diagram and template. (see page 23)
Precaution
• Do not connect the hot water supply pipe and water supply pipe in
reverse.
• Check that water is not leaking from the joint.
Installed drain pipe
hot water supply pipe
water supply pipe