15
Wiring
6
Power plug
(seat body)
Power outlet
Power cable
(for installation)
* Plugging
point
1 Connect power cable
<If connecting to a power cable (for installation) from the floor under the seat>
<If connecting to a power cable (for installation) from the water supply pipe and drain pipe area>
(1) Connect a power outlet to the power cable (for installation).
(2) Insert the power plug from the seat into the power outlet.
* When connecting the power plug into the power outlet, do it at the
plugging point and bring it to the top of the base. (see page 23)
<If connecting to an external power outlet>
(1) Fasten the power cable attachment tools to the base with screws.
(M5 × 10, 2 pcs)
(2) Disconnect the power plug of the seat at the connector and
connect the connector of the extension power cable (sold
separately) to the seat connector.
(3) Pass the extension power cable (sold separately) through the
hole in base plate U.
* The fastening methods for base plate U is outlined in number 2 below.
* Always use the extension power cables (sold separately) specified by
Takara Belmont.
2 Install base plate U to base plate H
Spread open base plate U and attach to base plate H with screws.
(M5 × 14, 2 pcs)
Precaution
Take care not to spread open base plate U too far.
Spreading the base plate out too far can result in the
deformation and damage.
Precaution
When installing base plate U,
ensure that the power cable (for installation) is not trapped.
Base plate U
Power cable (seat body)
Connector (seat body)
Base plate U
Base plate H
* Screw attachment
position
* Screw attachment
position
Extension power cable
(sold separately)
Power cable
attachment tool
Base
Extension power cable
(sold separately)
Extension power cable connector
Hole