Attach neck cushion
After installation
Remove the air mat attached to the basin and protective tape applied to the main body cover.
19
Attach neck cushion
(1) Set the neck cushion to the attachment tool in the direction as
shown in the image.
(2) Attach the seat side hooks of the neck cushion to the fastening
pins on the attachment tool.
* Take care not to lose the fastening pins.
(3) Adjust the shape of the neck cushion to suit the attachment tool,
and attach the basin side hooks of the neck cushion to the
fastening pins.
Attach head pillow
Insert the head pillow in the direction as shown in the image.
Neck cushion
Hook
Fastening pin
Basin side
Seat side
Head pillow
(underside)
The long edge
faces seat side
Attachment tool
Hook
Hook
The short edge
faces basin side
Precaution
Always conduct the following inspections to prevent accidents during use.
(1) Are there any screws that have not been attached?
(2) Is there any rattling?
Check the attachment areas again if there is any
rattling.
(3) Are there any cracks or dirt on the basin?
(4) Is there any damage or blemishes on the exterior
parts?
(5) Is water leaking onto the floor surface?
(1) Are there any screws that have not been attached?
(2) Is the seat body operating correctly?
(3) With the seat back down, does the end of the seat
back hit the basin?
(4) Do the seat back and seat hit each other?
Are the seat back and seat bent?
(5) Are there any blemishes such as damage on the
exterior parts
Inspection items (basin body)
Inspection items (seat body)