- 20 -
NORMAL OPERATION
•
Flow rate to activate the T-K3-OS/SP : 0.5 gallon per minute
•
Flow rate to keep the T-K3-OS/SP running : 0.4 gallon per minute
1. NORMAL OPERATION
WITHOUT REMOTE CONTROLLER
1.
Open a hot water tap.
2.
Mix cold water with the hot to get
the correct temperature water.
3.
Close the hot water tap.
2. NORMAL OPERATION
WITH REMOTE CONTROLLER: TK-RE02 (Optional)
1.
Press the operation ON/OFF button.
2.
Set temperature. (Example: 104
°
F)
The temperature options
(unit:
°
F)
99
100
102
104
106
108
110
111
113
115
117
122
131
140
158
167
•
Temperature settings 140
°
F and above are for heating applications only.
3.
Open a hot water tap.
Mix cold water with the hot if you need.
4.
Close the hot water tap.
WARNING
Hot Water temperatures over 125
°
F can cause severe burns
instantly or death from scalding.
•
The outlet hot water temperature of the FLASH T-K3-OS/SP
water heater is factory set at 122
°
F.
•
Feel the water temperature before bathing or showering.
The temperature is
displayed on the remote
controller when the remote
controller is ON.
Lamp is
ON
Lamp is
OFF
Summary of Contents for T-K3-OS
Page 40: ... 40 19H046 ...
