- 22 -
TEMPERATURE SETTINGS
•
There are 4 preset temperatures that you can select from by changing the dipswitch settings
at the bottom left corner of the computer board.
•
The temperature has been preset at the factory to 122ºF (50ºC).
•
If you desire to change the set temperature with dipswitches, please refer to the following
diagram. These temperatures are available: 113ºF, 122ºF, 140ºF, 167ºF.
•
140ºF and 167ºF are for heating applications only.
•
If you desire a hot water temperature other than the 4 preset settings, please purchase the
optional temperature remote controller (part No. TK-RE02).
•
With this optional TK-RE02 you can set the temperature from 99ºF to 167ºF with various
increments.
•
Please read the instructions carefully prior to installing the TK-RE02, as failure to do so
could damage the temperature controller and/or the water heater, which will void the
warranty.
•
Turn off the power supply to the heater when you change the dipswitch
settings.
•
Only change the switches with the dark squares. The dark squares indicate
which direction the dipswitch should be set to.
Summary of Contents for T-K3-OS
Page 40: ... 40 19H046 ...
