- 33 -
OPTIONAL ITEMS
1. TK-RE02 Temperature Remote Controller
The TK-RE02 Temperature
Remote Controller has two
functions. It allows the
output temperature from
the T-K3-OS/SP to be
adjusted within the range
of 99 °F to 167 °F, and it
also works as a diagnostic tool that will give a
concise error code whenever there is a
problem with the unit. The temperature options
are 99°F, 100°F, 102°F, 104°F, 106°F, 108°F,
110°F, 111°F, 113°F, 115°F, 117°F, 122°F,
131°F, 140°F, 158°F, and 167°F. See the
trouble shooting section for information on
possible error codes.
2. TK-TV01 Vent Terminator (for T-K3-SP)
This terminator can be used
where a T-K3-SP is going to
be vented out through a
wall. This is a CSA tested
Takagi component. Connect
the Category III stainless
steel vent pipe from the top
of the unit to the backside of this terminator to
exhaust flue gases through the wall without a
thimble. Install this vent terminator in
accordance with Takagi’s installation
instructions and any applicable codes.
3. TK-TV03 Vent Damper (for T-K3-SP)
The TK-TV03 Vent
Damper prevents the
backflow of air
through the exhaust
vent. This is a CSA
tested Takagi
component. This
helps prevent harmful
exhaust gases from entering the home, as well
as helping to prevent the unit from freezing in
areas where cold air can be blown or drawn
into the exhaust system. Install this vent
damper in accordance with Takagi’s
installation instructions, and any applicable
codes.
4. TK-TV04 Vent Cap (for T-K3-SP)
The TK-TV04 Vent Cap
is for outdoor
installation with the T-
K3-SP water heater.
The cap is installed on
the top of the unit,
instead of connecting
an exhaust vent pipe. The cap will prevent
any debris that might be in the environment
from entering the unit and causing damage or
a fire hazard, as well as preventing rain or
other weather from entering the unit.
Summary of Contents for T-K3-OS
Page 40: ... 40 19H046 ...
