TAJIMA TFHX Series, User Manual

Page: 120 / 140

CHAPTER 12 MAINTENANCE
113
2. CLEANING
WARNING
During machine cleaning, you could sustain severe injuries due to
electric shock or being entangled by moving machine units. There-
fore, observe the following items when you clean the machine.
Even if the primary power supply is turned off, some circuits
are still charged. Wait (4 minutes) until these circuits are com-
pletely discharged and then start cleaning.
The maintenance operations must be performed by properly
trained personnel.
When restarting the machine after maintenance operation,
attach all covers etc. which were removed for maintenance
operation.
CAUTION
If the slits of the power supply/driver box and/or the filter of the
main shaft motor is clogged, temperature inside the boxes or the
main shaft motor increases, which could cause malfunctioning of
the machine.
Clean the slits and filters at the specified intervals.
Cleaning area Cleaning cycle
(1) Case linear section
(2) Filter section of main shaft motor
(3) Filter section of power supply/driver box
Once/week
Åi4Åj X-axis drive system, Y-axis drive system Once/2 weeks
Åi5Åj ATH section Everyday
2
A
B
C
D
E
3
5
Attaching position of the main shaft motor
(B) differs depending on machine specifica-
tions.
3
1
4
5
(GC07)
!
!
A
B
D
C
E