TAJIMA TFHX Series, User Manual

Page: 105 / 140

CHAPTER 9 OUTLINE OF FUNCTIONS
98
6. MANUAL OFFSET
7. AUTOMATIC OFFSET
1. It performs manual thread trimming after it
makes the machine stop at the free setting
point (A).
2. Move the embroidery frame by manual frame
travel to B to check embroidery design, etc.
3. When executing manual offset, the frame will
move to the free setting position (A).
This function returns the frame to the original position when the machine was
stopped in the middle of embroidery and the frame was moved to a free setting
point manually.
B
A
A: Free setting point
B: Frame travel position
A
B
A
(GC07)
When there is no middle position (C), the
frame will move directly to the offset start
position (D).
This function moves the embroidery frame forward automatically at the end posi-
tion of design.
2. The machine will stop at the end position of design (B)
to perform thread trimming, and the embroidery frame
will move to the offset start position (D) through the
middle position (C).
A: Design start position
B: End position of design
C: Middle position
D: Offset start position
D
B
C
3. Change fabric or frame.
1. When starting the machine, the embroidery frame will
move to the design start position (A) through the mid-
dle position (C) and embroidery will start.
D
A
C
When there is no middle position (C), the
frame will move to the design start position
(A).