taiyo TF-711, User Manual

Page: 15 / 34

- 12 -
3.3.3 Start and stop of recording
(1) Start
Recording starts automatically (Start/Stop, Phase, Speed, IOC) by receiving the
APSS signal. To start halfway of the received picture, press key once and
automatic speed setting and auto-phasing mode are set. Then, recording starts
upon phasing is completed. When the phase signal for automatic start is not
received, recording does not start. Then, press key again for manual
recording.
(2) Stop
Recording stops automatically when auto stop signal is received. In the absence of
auto stop signal or to stop halfway, press key.
3.3.4 Manual phasing
In manual recording mode or when the phasing is not completed in the proper
position by auto phasing, be sure to adjust the phase using the key.
The phase signal shifts by 2.5% of the paper width or about 6.4mm per keying.
3.3.5 Synchronization
When a recorded picture (phase signal, etc.) drifts to left or right, be sure to adjust the
synchronization with SYNC knob to stop drift.
When the picture is such as shown in the left illustration (
①
), turn the knob counter-
clockwise. In case of the right illustration (
②
), turn the knob clockwise.
RCD
RCD
RCD
SYNC
Turn
clockwise
Turn counter-
clockwise
①
②