Personal injury or death may be resulted when handled
improperly.
●
All wiring should be properly insulated to prevent electric shock, especially when
using AC power supply of 200V or higher.
Protect wire and cables with pipes from heat or mechanical injury.
●
The ground terminal on its rear panel should be connected to the vessel with
copper belt or heavy braided wire.
●
Handle LCD (liquid crystal display) carefully not to break its glass.
When the glass is broken, do not touch the liquid in it. Particularly keep it away
from mouth or eye. When you touch the liquid, wash it out with running water.
●
Handle carefully the manganese lithium dry cell in the circuit. Do not heat it or
put it into fire.
SAFETY INSTRUCTIONS
WARNING
Personal injury or damage to property may occur when
handled
improperly.
●
Use the power supply as defined in the specification.
●
Select a position to install the main unit. Avoid rain or water splash, direct
sunshine, strong vibration or high temperature.
Keep a separation larger than 1.1 m from a magnetic compass or 0.9 m from a
steering compass to avoid unfavorable influence.
●
Do not use organic solvent such as thinner or alcohol to clean the main unit.
Use soft cloth soaked in neutral detergent solution and well squeezed.
●
Use the genuine recording paper (Taiyo Thermal paper, 257mmx60m), and install
it to the main unit in accordance with the procedure indicated in the section 2.6 of
the User's Guide.
●
Follow local regulations when disposing a main unit or its dry cell.
CAUTION
Summary of Contents for TF-711
Page 33: ...Base Cabinet Outside view ...
