taiyo TF-711, User Manual

Page: 18 / 34

- 15 -
3.4.1 Switching of receiver (audio)
Switching of the internal or external receiver is set by the following procedure.
Press key. Then the receiver switching
mode is set and message on the right appears.
The displayed number 1 is for internal receiver, 2
is for external receiver. Pressing the key
after setting a key, completes the setting.
3.4.2 Setting of timer reception
This unit has 16 booking functions and each timer is set as follows.
Press key. Then the timer reception
setting mode is set and the message is shown on
the right. The displayed number correspond to
the following entries respectively.
1 : Release
2 : Setting
3 : Re-calling (readout of the booking data)
4 : Entry booking
(1) Release
Press key. Then the message is shown
on the right. Pressing the key releases
the timer mode
(2) Setting
Press key. Then the message is shown
on the right.
Select booking number(s), 0~F, by pressing
key. The display shown on the
right is an example when selecting booking
number “0”.
Then, press key to fix the selection
Plural selection of the booking numbers are
acceptable. The display shown on the right is
an example when select and fix the booking
number “0”, “1”, “2” and “3”.
Press the key to complete the setting.
AF IN : INT
1-INT 2-EXT
E
N
0
〜
9
1
TIMER RCV : 1-OFF
2-ON 3-RCL 4-STR
TIMER RCV : OFF
PUSH E KEY
SET REG No. 0-F
PUSH
△
/
▽ ＆
&E KEY
TIMER RCV NO.: 0
2
1
E
2
E
TIMER RCV NO.: 3
0123
△
▽