Chapter 4 Maintenance
■
4-6. Rotation of LCD monitor
●
Before rotating the LCD monitor, be sure to turn off the power switch and unplug the power
plug from the concentric.
●
When rotating the LCD monitor, use two or more people. Failure to do
this will cause the LCD monitor to fall, resulting in damage or injury.
Open the ejector door, turn off the power switch, and unplug the power plug from
the outlet.
electrical plug
Power switch
Rejector door
Open the control panel toward you with the service key. Remove the screws (2 places)
and remove the control cover (rear). * If NESiCAxLive is installed, connect the USB
cable to the RFID R / W unit.
Remove it from the ASSY and store it in the hole of the control panel assembly. Also,
remove the RFID power harness from the FAST I / O AMP PC board.
Control panel
Incorporates NESiCAxLive
Work required if
RFID R / W unit assembly wiring diagram
NESiCAxLive
USB cable for
(A
→
mini-B)
J1
USB for battle connection
Cable (B
→
mini-B)
* Only when connected
J2
Service key
RFID R / W unit ASSY
RFID power harness wiring diagram
RFID power harness
Control cover (rear)
56
Chapter 4
ON
OFF
OFF
POWER
SELECTENTER
DOWN
UP
MENU
SOUND
VOLUME
TEST
SERVICE
SWITCH
SWITCH
ON
OFF OFF
