Chapter 4 Maintenance
-With the optional "Buurix New JAMMA Power Supply Kit"
Only if you have the "Buurix JVS Board" installed
~
4-3-2 Installation of JAMMA VIDEO standard (JVS) compatible game board
caution
●
This unit does not support the monitor horizontal synchronization frequency of
15.75kHz. Please change to 31kHz in the game board settings and connect.
●
When connecting another company's game board, use the special harness specified by
the game board manufacturer.
●
Burix The current capacity of the power supply board of the new JAMMA power supply kit
(option) is DC12V 4A, 5V 10A, 3.3V 12A. Never use a game board that requires more than this
value. Failure to do this will cause an unexpected accident.
●
When not using the new Burix JAMMA power supply kit (option), disconnect the
connector from the new Burix JAMMA power supply kit (option) and bundle the harness
with a clamp.
●
Depending on the game board, it may not be possible to display properly on the Burix diamond. In
order to display normally, you will need to keep the game board, and in some cases, you will need to
pay for custom support and adjustment. note that.
Secure the game board to the PCB baseboard. For the fixing screw, use the screw
that came with the game board to be installed.
Game board
PCB baseboard
Store the PCB baseboard and secure it with wing bolts.
[Butterfly bolt: M4x25] 2 places / [Flat washer: 4.5x18x1.6t] 2 places
Power connector connection
Remove the power supply board harness that is secured by the clamps (2 places).
For power supply board
C Remove the ness
Clamp
For power supply board
Remove the harness
42
Chapter 4