Chapter 2 Installation
Insert the notch hole of the control panel assembly into the head of the bolt temporarily fixed with,
slide it toward you, and hook the control panel assembly with the bolt.
Tighten the temporarily fixed bolts, and then fix them with the bolts (2) that were removed.
Control panel assembly
Bolts (4 places) are tightened
Up to control panel assembly,
Please support it firmly with your hands.
Bolt in the notch
Fit and pull
Call
Open the front door with the service key.
Fixed inside the front door[P4 / C]Remove the connector and JVS cable or LAN cable,
pull it out from the hole in the control panel assembly, and secure it with a clamp. *
Incorporates optional Burix JVS board or NESiCAxLive
In that case, connect each connector as shown in the figure. * The X
connector is not used, so do not remove it from the clamp.
Clamp
C- Ness
Fixed
is.
From the inside with the connector (P4 / C)
JVS cable or LAN cable
Pull out and fix it with a clamp.
Optional Vewlix
If you have a JVS board installed
If you have NESiCAxLive installed
JVS cable
C connector
C connector
Clamp
Clamp
FAST I / O
AMP
PC board
B
P4 connector
Chapter 2 Installation
twenty one
