Chapter 4 Maintenance
■
4-7. Fixing the control panel assembly
When re-transporting the machine, be sure to fix the control panel assembly with the shipping
bracket. Failure to do this may cause an unexpected accident.
Open the ejector door and turn off the power switch.
Open the control panel toward you with the service key. Remove the screws (2 places)
and remove the control cover (rear). * If NESiCAxLive is installed, use the RFID R / W
unit ASSY to USB.
Unplug the cable and store it in the hole in the control panel assembly. Also,
remove the RFID power harness from the FAST I / O AMP PC board.
Incorporates NESiCAxLive
Work required if
RFID R / W unit assembly wiring diagram
Control panel
NESiCAxLive
USB cable for
(A
→
mini-B)
J1
USB for battle connection
Cable (B
→
mini-B)
* Only when connected
J2
RFID R / W unit ASSY
RFID power harness wiring diagram
RFID power harness
Service key
Control cover (rear)
Remove each connector (P4 / C) and JVS cable or LAN cable, and store them in the holes.
Clamp
Connector (P4 / C) and JVS cable
Or store the LAN cable.
Optional Vewlix
If you have a JVS board installed
If you have NESiCAxLive installed
JVS cable
C connector
C connector
Clamp
Clamp
FAST I / O
B
P4 connector
Chapter 4 Maintenance
65 65
