( 1 J Loosen two screws by the accessory
spanner or a coin and remove the Yarn
Feeder from the Connecting Arm.
(2) Set the Plating Yarn Feeder to the
Connecting Arm as shown in the
figure.
(3) Then fasten the screws.
(4) Thread the main yarn to the right side
of the Yarn Tension Unit and the plating
yarn to the left side of 11.
(5) Disconnect the KR carriage from the
Connecting Arm
Thread the main yarn into the Main
Yarn Feeder and the plating yarn into
the Plating Yarn Feeder.
·Thread only the Plating yarn ,nto the
Plat, ng Yarn Guide
• Make sure that the two yarns do not
cross.
__ ©
--..i
g}
_,
6
.,,_
__
0
Plating
Main Yarn Feeder
Yarn
----------
Feeder
---JooG'--!'8W@d--
x
-41-