(4) Holding the ribber with both hands so
that the gate pegs of the ribber are up
and the purl needle butts are toward
you.
Insert the l,p of right bracket beneath
the knitter bed as far as it will go. then
i_nsert the left bracket
(5) Set up the reinforcing arms of the
brackets. and place the flat parts of
the arms on the table.
(6) Using the clamps of KH. fasten the
arms to the table.
(7) Place the rear foot of the KR carnage
into right end of the rear rail of the
needle bed. and keeping off the front
foot from the front rail. move the KR
carriage to left as shown in the
photograph.
Reinforcing arm
Stopper pin
Rear rail
