2.
If
the carriage should jam ...
( 1) Disconnect the ca rriage
Se e on page 15.
a. Set the Change knob on KH carriage
to
··cw
position. and
lift
up the KH
carriage.
b Place the KH carriage to the side
from where the row commenced.
then return the Change knob to the
pos1t1on which has set before
Jamming.
(2) Remove the front foot from the front
rail of KR needle bed And place the KR
carnage at the same side of KH
carriage.
(3) Connect both carriages.
(4) Work the correction s if required.
(5) Continue the knitting.
3. How to use the knitter as a single
bed with the ribber attached
a. Disconnect the carriage.
b. Push down both bracket levers of
the ribber and the ribber will come
down one step
c. Take off the connecting arm from
the KH carnage. and convert 1t to the
sinker plate a ssembly of knitting
machine.
d The knitter can be used as a single
bed.
