T801-4 Installation and Operation Manual
Programming
41
© Tait Electronics Limited September 2007
Data Log
Selecting the
Write to Disk
check box will cause the system to write a
continuous stream of measurement results to a file on your ET computer.
The file name is “Satsync.csv” and it is placed in the same directory as the
ET exe file. The log file will be overwritten each time the feature is enabled.
If you want to keep the data, change the file name before you write more
data.
To view a display of the last 10 frequency measurement results, refer to
“Viewing the Data Log” on page 42
.
Apply
Click
Apply
to save the changes and close the dialog box.
Close
Click
Close
to close the dialog box without saving any changes you have
made.
Settings Menu
Select Settings > Save to save the settings from the Setup screen to a file.
This file will have the “.sat” extension.
Select Settings > Open to open a previously saved configuration file. Once
this file is open, click
Apply
to program the settings into the Satsync 7
module.
