Tainet Xstream 1300 Series, User Manual

Page: 82 / 86

APPENDIX
1300’s Craft Port and PC’s COM port).
3. If the PC’s COM port is not the 9-pin of the terminal cable but
25-pin one, the user can change the adapter through correct pin
assignments.
4. Turn off the XSTREAM 1300.
5. Presses the UP, RIGHT, LEFT three keys at same time.
6. Turn on the XSTREAM 1300.
7. Release the UP, RIGHT, LEFT three keys when LCD screen
presents “Upgrade Key Hit!” and then the LCD will displays
“FLASH ERASING!”.
8. The XSTREAM 1300 FLASH memory dumps will display on the
PC’s or Terminal’s Monitor if the connection is successful.
9. When “C” character is present, send the binary file
(USEFLASH.BIN) of new XSTREAM 1300 software use
1K-XMODEM file transfer protocol. (See Figure D-1)
10. If downloads successfully the XSTREAM 1300 FLASH memory
new dumps will display again.
Figure F-1 : The XSTREAM 1300 Memory Dumps
F-4 FLASH Download
When the XSTREAM 1300 software has downloaded completely, the
system will reprogram the FLASH and after that, reset the system
automatically.
70