Tainet Xstream 1300 Series, User Manual

Page: 63 / 86

CHAPTER 6 ROUTER MODULE OPERATION
6.3.4 FrRelay Setup
Local IP This parameter identifies the IP address for local WAN port
when the WAN protocol is selected Frame Relay.
IP
Netmask WAN port IP netmask when the WAN protocol is selected
Frame Relay.
Remote IP This parameter identifies the IP address for the WAN port
on a remote router when the WAN protocol is selected
Frame Relay.
LMI type Select Local Management Interface type to match the
public network, or the setting at the far-end in a private
network.
DLCI
number This Parameter identifier the Data Link Connection
Identifier address for the connection.
6.3.5 AUX Setup
AUX Port Enable or Disable the AUX port.
Local IP This parameter identifies the IP address for local WAN port
when the WAN protocol is selected Frame Relay.
IP
Netmask WAN port IP netmask when the WAN protocol is selected
Frame Relay.
Remote IP This parameter identifies the IP address for the WAN port
on a remote router when the WAN protocol is selected
Frame Relay.
AUX Port
Speed Select data speed & format
6.3.6 Routing Table
Default
Gateway If the Router Module receives a packet for an ”unknown”
destination (i.e. a packet with an IP address is not listed in
the routing table), it forwards that packet to the Default
Gateway if one has been defined.
51