Tainet Xstream 1300 Series, User Manual

Page: 55 / 86

CHAPTER 5 SYSTEM TERMINAL OPERATION
5.6 SYSTEM CONFIGURATION submenu
As mentioned in chapter 3, the configuration is set up via LCD Front Panel. In
this section, the configuration is set up via PCs or Terminals. The main menu
display on the screen is shown in the Figure 5-2. There are three options to be
selected, i.e.
System Configuration , Display Status , and Load Profile .
To configure the XSTREAM 1300 device, user selects option one –
SYSTEM
CONFIGURATION and the next pop-up menu will come up as Figure 5-3.
It is clear that the System Configuration has come up with six options to be
chosen by the user. The first three options (1 ~ 3),
MODE , Tx Pwr
ATTENUATION
, and
WETTING CURRENT
, are the same as the submenu tree
of the
MODEM CONFIG
. The last three-option (4 ~ 6),
DTE SPEED
,
TX
CLOCK SOURCE , and DATA PORT SELECTION , are the same as the
sub-menu tree of the
DTE CONFIG
.
Figure 5-3 : Pop-Up Menu of the
SYSTEM CONFIGURATION
Press
TAB key can change sides between local and remote when system is in
DATA mode.
To modify the system parameters, enough information on the bottom line is
provided to help the user to change the settings.
43