Tainet Xstream 1300 Series, User Manual

Page: 34 / 86

CHAPTER 3 INSTALLATION GUIDE
3.4.3 Make Connection
1. Repeat section 3.4.1 steps 1 to 3 for CO unit. Press HOME key and
the LCD shows :
L 2048 Kbps CO
handshaking I
2. Repeat section 3.4.1 steps 1 to 3 for CPE unit, just select the different
profile as LCD shows:
L 2048 Kbps CO
handshaking I
L MENU SELECT
STATUS
L MENU SELECT
PROFILE
L PROFILE
0-CO-2048-INT
Loading...
System Restart
L PROFILE
0-CO-2048-INT
3. Wait for several seconds, both XSTREAM 1300 will perform
“CONNECTING” test mode.
L 2048 Kbps CO
connected 42I
L 2048 Kbps CPE
connected 42R
4. Make sure both BER testers are connected.
3.5 Trouble Report
The LCD screen will show the above display when you have followed above
operation procedures. If not, please these steps several times to double check.
You can utilize the trouble report (refer
Appendix-G Trouble Report). If you still cannot get the right display, you
can obtain help via email or fax from your nearest dealer, or directly from Tainet.
22