Tainet DT-2000 Series, User Manual

Page: 70 / 71

APPENDIX A-1
APPENDIX
A. Ordering Information
Model /Module Description Part No.
DT-2000 HDSL, 2 loops Full E1 HDSL; Standalone Basic Unit
with G.703 Interface module 000069-0001
DT-2000F HDSL, 2 loops Full & Fractional E1 HDSL;
Standalone Basic Unit without DTE module; Using AC
Power Source 000071-0001
DT-2000FP Using Loop Power 000071-0004
DT-2000FD Using DC power source 000071-0003
/R530-3A RS-530; Female 000065-0126
/V35-3A V.35, Female 000065-0127
/V36-3A V.36, Female (R530-3A with V.36 adapter cable) 000065-0128
/X21-3A V.21, Female (R530-3A with X.21 adapter cable) 000065-0129
/G703B-3 G.703 2M, Balance 000065-0121
/G703U-3 G.703 2M, Unbalance 000065-0122
DT-2000N HDSL, 2 loops Full E1 HDSL card for Super Shelf
(NMC-32), with G.703 Interface module 000069-0002
DT-2000NF1 2Mbps rack mounted modem card with G.703
interface module and optional N x 64Kbps data port
interface, provide wetting current(sealing current) 000071-0002
DT-2000NF2 Provide Loop Power 000071-0005
/V35-1A V.35 module 000046-0033
/R530-1 RS-530 module 000046-0015
/V36-1 R530-1 module with V.36 adapter cable 000046-0022
/X21-1 R530-1 module with X.21 adapter cable 000046-0017
/Router Router module 000077-0002
TRS-32 16 slot rack mounted shelf 000053-0004
/TB-32 TRS-32 rear panel module board (option)
Terminal block for line connection 000053-0002
/TB-32LP TRS-32 rear panel module board (option)
Terminal block for line connection and loop power
input (DC –48V) 000053-0012
/PJ-32A TRS 32 rear panel module board (option)
RJ45 for line connection 000053-0007
/CA50 50 pin cable for standard centric connector 000053-0003
NMC-32 Network Management Controller 000055-0002
PW-132A AC power supply for rack 000057-0001
PW-132D DC power supply for rack 000057-0002
*For easier configure of DT-2000/F/N, refer to Full E1 configuration section.
For easier configure of DT-2000F/NF, refer to Fractional E1 configuration section.