Tainet DT-2000 Series, User Manual

Page: 44 / 71

OPERATING, MAINTENANCE 4-1
CHAPTER 4 : OPERATING MAINTENANCE
4.1 Using the LCD Menu
The LCD menu makes you to configure, monitor, and maintain the DT-2000 series
system easily. Refer to Chapter 2 for the feature descriptions of each menu item. The
operating and display of the LCD menu are described as following.
l
Keyboard
Five keys are provided on the LCD panel of the DT-2000, DT-2000F,
DT-2000N and DT-2000NF which can be controlled from the NMS controller:
Up (EXIT on NMS controller ) , Down (ENTER on NMS controller ) , Left,
Right and Home . The keyboard is used to select menus, view the various
screens, execute the command, and when necessary, to select alpha and numeric
information into the system.
l
LCD
The 16x2-char LCD panel is used for displaying menus and messages. The LCD
back-light which is controlled by the software will automatically switch off after 5
minutes for power saving.
l
Flashing Char
In the LCD menu, the flashing char is used to indicate data entry fields. Use the
keyboard to enter the alpha or numeric information.
4.1.1 The LCD Menu Display Format
The following screens show some examples of the LCD display formats.
l
Model and Version:
DT-2000F
Ver 2.02/304/1.1
When at the top of the LCD menu tree, press HOME/ UP key will enable you to
see the model name and the version number.
l
Menu Selection:
E1-C 2.048M
STATUS
Use RIGHT or LEFT key to see the next or previous item on the same menu