Appendix
Appendix
Ⅰ
: Connect RG-59 Coaxial-cable
to TES-5600R
1. Strip 10mm insulation of cable sheaths, twist the
braided shield into a bundle and cut off unnecessary
Mylar paper and insulation;
2. Open the cable clip, insert the conductor to the
connection hole, and clip the braided shield and the
cable into the cable clip;
3. Fix the screws. At last, fix the coaxial-cable into
the slot.
Appendix
Ⅱ
: Soldering of BNC connector
and RG-59 Coaxial-cable
1. Strip 5mm insulation of cable sheaths, twist the
braided shield into a bundle and cut off unnecessary
Mylar paper and insulation;
2. Insert the cable into the corresponding hole of the
BNC connector and clamp the iron part;
3. Solder the connection points and screw on the
BNC adapter sleeve.
60
