3.4 Installation
3.4.1 Ceiling mounted
3.4.1.1 Ceiling mounted 1
①
M3 screw
②
Fixing bracket
③
Rubber plug
④
Hard ceiling (such as concrete ceiling)
⑤
TES-5600R(N) digital infrared receiver
Figure 3.7
TES-5600R(N)
digital infrared receiver ceiling mounted 1
Mounting steps:
Step 1:
Position the fixing bracket on the ceiling according to the installation location of the
TES-5600R(N) and mark the positions of the drilling holes. Drill four holes (5 mm
diameter, 30 mm depth) into the ceiling;
Step 2:
Put the rubber plugs into the mounting holes on the ceiling;
Step 3:
Put the convex side of the bracket facing the ceiling, and fix it with M3 screws;
Step 4:
Put the slots of TES-5600R(N) digital infrared receiver into hard ceiling fixing
bracket and fix it with clockwise rotation.
WARNING:
This installation method is applicable when the ceiling thickness is significantly greater than the length of the
rubber plug.
23
