2.3 Installation
TES-5600M series digital infrared wireless system
main unit is half-rack width and can be fixed in a
standard 19-inch cabinet single or for two main units
abreast.
Installation of single main unit
First unscrew the lateral screws
①
from the housing.
Then fasten the brackets
②
and
③
with these screws
and put the main unit in the cabinet. Finally fix the four
holes
④
up with screws (see Figure 2.2).
Figure 2.2 Installation of single digital infrared wireless
system main unit
Installation of two main units abreast
First unscrew the screws
①
on the lateral and bottom
from the housing. Then fasten the four brackets
②
with
these screws and put the main units in the cabinet.
Finally fix the four holes
③
up with screws (see Figure
2.3).
Figure 2.3 Installation of two digital infrared wireless
system main units abreast
In addition, 1U metal stripes are included as decoration
to be installed between the main units in the cabinet. It
is also good for the ventilation and cooling off. Fix up
the four holes
③
with screws (see Figure 2.4).
Figure 2.4 Decoration of cabinet
Note:
There are vents in the both sides and bottom of
the main unit. Do not cover the vents and
please save enough area to keep good
ventilation for the equipment.
9
