2.5 Configuration and operation
Digital infrared wireless system main unit can be
configured and set up through menu operation with knob.
All menu items operation will be introduced one by one in
this section.
A) Starting initialization
Switch on and press the "POWER" button, the
TES-5600M digital infrared wireless system main unit will
start initialization:
B) Initial interface on OLED
The initial interface on the OLED includes channel status
and microphone battery capacity.
Under initial interface of TES-5600MA, switch the
knob to enter the master volume control menu;
Rotate the knob to adjust the volume
（
range: -30 dB
to 0 dB
）
, and then keep pressing the knob to confirm
and turn back to the initial interface.
C) Access main menu
Pressing the knob under initial interface will go to main
menu, which includes ten menu items:
“Mic. Sens.”
“Line In Vol.”
“EQ Setting”
“Auto Fade”
“FB Suppress”
“Line In 1 Set.”
“Language”
“Factory Reset”
“About”
Rotate the knob to switch submenus one by one;
Press the knob to go to the corresponding
submenus.
2.5.1 Mic Sens.
Adjust the sensitivity of the digital infrared wireless
microphones range: -
∞
(mute), -30 dB to 0 dB.
1. Press the knob to enter the microphone selection
interface;
2. Rotate the knob to select a microphone, and then
press the knob to enter the sensitivity adjusting interface,
the hollow pellet will turn solid;
3. Adjust the sensitivity by rotating the knob and then
press the knob to confirm.
Note:
Keep pressing the knob to return to the OLED
initial interface under any menu.
12
