Tahoe TI9000LXU, Operation Instructions And Parts Manual

Page: 28 / 34

- 26 -
■
Insert a large cotter pin through the hole in the axle.
Bend the ends of the pin to secure.
■
Repeat the process on the other side.
INSTALLING THE FRAME SUPPORTS
See Figure 2.
Install the two frame supports provided on the bottom side of the
generator frame opposite the wheels.
■
Locate the following items:
2 frame supports 6 bolts
■
Raise the end of the generator where the recoil starter is
located high enough to gain access to the frame bottom;
securely position props underneath to support.
■
Tighten bolt to secure.
■
Repeat with the two remaining screws
■
Repeat on other side to install second frame support.
INSTALLIG THE HANDLES
See Figure 3.
■
Locate the following item:
2 handles 2 clevis pins
2 small cotter pins
■
With the generator in normal operating position, find the holes
on the frame above the recoil starter.
■
Align the holes in one of the handle brackets with the holes in
one side of the generator frame.
■
Insert a clevis pin through the handle bracket and frame.
The head of the pin should be on the outside of the clevis pin.
Bend the ends of the pin to secure.
■
Repeat the above steps to install the second handle.
APPLICATIONS
This generator is designed to supply
electrical
power for operating
compatible electrical lighting,
appliances, tools, and motor loads.