TagMaster XT Mini, Manual, Page: 23 / 32

XT-1/XT Mini Manual 13-111 05, 2015-08-14
Page 23 of 32
The TAGP protocol reports tag events as they come out of the tag filter.
4.3.5 Data Selection
The "Data selection" settings (under Settings…/Data Selection in the web interface) specifies how the read
data shall be interpreted (binary, hexadecimal or decimal) and also makes it possible to select a part of the
data (number of digits with a left or right aligned offset).
Reader protocols with binary output reports data as it comes out of this stage.
4.3.6 Data Format
The "Data Format" settings (under Settings…/Data Format in the web interface) specifies the output format
for data that is pushed to RS232, RS485, TCP Client, and the built-in access controller.
Firmware Upgrade
The latest version of the reader firmware can be downloaded from
ftp://partner:245ghz@ftp.tagmaster.com/Vigilant/Firmware .
Follow the instructions in the README document that is available in the same directory to install the
required tools and upgrade the reader firmware.
Factory Defaults
Use the following procedure to restore the reader to factory default settings:
1. Set DIP switch S101:2 to ON
2. Power cycle the reader
3. Set DIP switch S101:2 back to OFF
1 8
ON
S101
1 8
ON
S101