The cursor keys
G
,
H
,
E
and
F
plus the
skip +
and
skip -
keys have different features assigned to
them, depending on the mode your AV32R DP is currently in.
The AV32R will automatically switch between these assignments, anticipating what your most likely
expectation will be at any moment. You can also switch manually between these assignment at any
time. Just keep the
ok
key pressed for more than three seconds and a screen similar to the one shown
on the left comes up.
For more details refer to the AV32R’s user manual.
heading
|
31
TM
A
1 controller > cursor key functions
|
31
If the AV32R DP is connected to the TMA1,
then you will find a sixth entry which allows
you to activate 6 different macros per input
key to the cursor and skip +/ skip - keys.
This allows you to integrate the key control
of 3
rd
party products into your AV32R DP
remote control, as explained below:
This is a copy from the AV32R Dual Processor’s user manual:
