manualshive.com logo in svg

TAG MCLAREN AUDIO AV32R, User Manual

Share
Download
TAG MCLAREN AUDIO AV32R User Manual Download Page 69

D

A

B digital radio

|

73

When set to 

On

, the volume of very loud passages will be reduced and the volume of very

quiet passages will be increased. You should select 

Off

, unless you listen in a room with high

background noise.

limit dynamic range

program type scan

This feature allows you to search for a specific programme type, say Jazz Music or Light
Classic. Assuming a station broadcasts the appropriate indicator flags (unfortunately not all
stations do), the DAB digital radio Upgrade will tune to exactly a station of that type.

radiotext display

DAB radio status screen

The menu 

Radiotext Configuration...

leads to a

menu, allowing you to configure the radiotext
display on the front display and on-screen:

Whilst listening to the AV32R’s digital radio you
can display scrolling Radiotext on the front panel
display.

You can also display scrolling Radiotext on your
display device, using the AV32R’s on-screen text
capability. You can restrict the display to the time
you listen to the DAB digital radio (

when on radio

only

), always (

when on any input

) or not at all

(off). With some of the advanced services, such as
BBC5LIVE, it can be quite exciting to superimpose
the latest news whilst watching tv.

Press 

ok

and the ‘normal’ status screen, explained on

page 23 will be replaced by a screen giving you all
information about the currently selected station, with
this meanings:

station:

name of the station as transmitted 

ensemble:

the name of the provider of the currently selected station

reception:

an indication of the reception quality (bit/error rate):n/a 
(no reception), 1/5, 2/5, 3/5, 4/5 and 5/5 (best)

data rate:

data rate of the transmitted data stream, including all
information: 4kb/s (low quality) to 256kb/s (high quality)

prog.type:

an indication of the type of programme, as transmitted by
the selected station

GRP00989.02-UK AV32R Dual.qxd  10/22/03  4:02 PM  Page 73

Summary of Contents for AV32R























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands