![TAG MCLAREN AUDIO AV32R User Manual Download Page 46](http://html.mh-extra.com/html/tag-mclaren-audio/av32r/av32r_user-manual_813572046.webp)
50
|
Input Options > analog audio inputs
Selecting
Analog Audio Inputs
will bring up
the list of all available analog stereo inputs.
Select the input you would like to
configure using the
G
or
H
keys,
followed by
ok
, and the following
screen comes up, allowing you to
modify these parameters:
The analog inputs can be renamed to a name
of your choice - just follow the instructions
described under video inputs on page 49.
You can calibrate the input sensitivity by entering a voltage here. The higher the value the lower
the sensitivity. A value should be selected that results in an equal volume level for all your
analog inputs without overloading the input. You can let the AV32R ‘Dual Processor’ let the
input calibrate for you, as described on the next page.
1. Occasionally you will find there are lip-sync problems, even with ‘correctly’ synchronised soundtracks. This may be because of poor
dubbing (matching the dialogue when the audio track is re-recorded) if the film has been dubbed from another language. It is not
possible to correct bad dubbing as the delay is constantly changing
name change
peak input
anti clipping
lip sync delay
This feature enables/disables the input
Anti-Clipping
operation of the AV32R ‘Dual Processor’.
When this feature is
On
, the AV32R ‘Dual Processor’ will automatically increase the peak input
level of any analog input which clips, i.e. is too large and will cause distortion.
A film’s audio track may not be perfectly synchronised with the picture , i.e. the dialogue
consistently fails to match the movement of the speaker’s lips. This can have two major causes:
1... poor recording- which might often even be varying during a movie
(1)
2... video processing takes longer than audio processing, caused by de-interlacing and
scaling technology
Use the Lip Sync Delay, as described in this menu, for correction of permanent delay, as
required for a video processor. Use the temporary Lip Sync Trim, as described on page 41
under
quick settings
for any additional correction required for a specific programme/DVD.
analog audio inputs
GRP00989.02-UK AV32R Dual.qxd 10/22/03 4:01 PM Page 50