manualshive.com logo in svg

TAG MCLAREN AUDIO AV32R, User Manual

Share
Download
TAG MCLAREN AUDIO AV32R User Manual Download Page 57

loudspeakers  > subwoofer > bass redirection rules

|

61

subwoofer

There is an important additional
set-up menu within the

SUBWOOFER

menu, the 

BASS

REDIRECTION RULES

, which define

the use of the subwoofer with those
processing modes which do not
have a LFE (0.1) effect channel.

If LR=Bass Ltd

If your left and right front speakers
are bass- limited and you would like
your subwoofer, if available, to take
the bass frequencies your left/right
speakers, cannot reproduce, set the
processing mode you like to
configure to 

If LR=Bass Ltd

. The 

Bass

Cutoff

frequency is the frequen-cy

defined in 

LOUDSPEAKERS

>

Left/Right

menu.

Always

If you want, for a given processing
mode, to combine your full range
left/right front speakers, then set
the rule to Always. This will treat
the full range speaker like a bass
limited speaker, transferring 
bass energy below the 

Bass 

Cutoff

frequency, defined in

LOUDSPEAKERS

> 

Left

/

Right

, 

to the subwoofer.

Never

If you want for a given processing
mode to ignore your subwoofer,
although your left/right front
speakers, are set to be bass
limited, then select 

Never

.

GRP00989.02-UK AV32R Dual.qxd  10/22/03  4:01 PM  Page 61

Summary of Contents for AV32R























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands