tae TA Series, Instructions And Operating Manual, Page: 80 / 86

Appendix 1 list of Parameters State 16.11.15
Misprints and technical changes reserved
Page 30
22: Error Log
ID Name Value-Range Default-Value Unit Access
819 errlog_time_now 2000-00-00T00:00:00 ... 2063-15-31T31:63:63 --- R
Current system time of regulator in T32 format
T32 Time Format
Timestamps are saved in the Error Logbook in a compact double word format. The structure of the bit field is as
follows:
T32 Time Format – Bit Field Description
Offset N Bits Name Value Range
0 6 Seconds
(0 … 59)
6 6 Minutes
(0 … 59)
12 4 Month
(0 … 11)
16 5 Hour
(0 … 23)
21 5 Day
(1 … 31)
27 6 Years since 2000
(0 … 63)
A time range from 2000-00-00T00:00:00 yo 2063-15-31T23:59:59 can therefore be displayed with this.
23: Trace
ID Name Value-Range Default-Value Unit Access
1000 trace command 0000h ... 0037h 0000h [bits] RW
Bit Name Function
0 Start Now Start Trace
1 Start On Trigger Start Trace including Trigger condition
2 Run Idle Activate Non-Real-time Trace
3
– –
4 Cancel Cancel current Trace
5 Reset Cancel current Trace and reset error/status flags
6…15
23: Trace
ID Name Value-Range Default-Value Unit Access
1001 trace status 0000h ... F133h ---h [bits] R
Bit Name Function
0 Trace Running Trace is currently active
1 Idle Running Idle-Trace (Polling Mode) is active
2
3
4 Trace done Trace is completed
5 Trigger active Trigger condition is currently fulfilled
6
7
8 Trace N/A Trace function is not available
9
10
11
12 Err#TrigParam Error: Invalid Trigger Parameter [1011]
13 Err#BufferOvrun Error: Trace buffer overflow
14 Err#BankSel Error: Invalid Trace Bank Selector [1040]
15 Err#ChSize Error: Maximum size of all Trace channels exceeded