Page 24
Tadpole M1400 Getting Started Guide
Configuring a server
1.
After selecting the
Servers
option at the main menu, you will be prompted for your
server IP address or name. You can enter up to 10 server addresses.
Figure 13.
Setup Servers
screen
2.
Next you will be prompted for a firmware server address. Enter the address if required, or
else press
[Enter]
and leave it blank.
Figure 14.
Setup Servers
screen
3.
At the “Save Changes” menu, highlight
Yes
and press
[Enter]
. Press
[Enter]
at the
prompt and
OK
to confirm configuration saved.
4.
For the changes you have made to take effect, you must re-initialize the Tadpole M1400
notebook. Press
[Menu-A]
to reset/reboot the notebook.
5.
Once negotiation between the client and server is complete, you are connected to the
server. You may now be presented with either a login screen, a request to enter your
smart card, or some other server-dependent startup screen.
Summary of Contents for M1400
Page 1: ......
Page 58: ...Page 58 Tadpole M1400 Getting Started Guide Notes...
Page 67: ...Tadpole M1400 Getting Started Guide Page 67...
Page 68: ......
