Tadiran Telecom EMERALD ICE, Quick Installation Manual, Page: 80 / 138

Emerald ICE Quick Installation Guide
menu tree
_ bksp save chg
Code Sequences
(listed at the left side of
every page/data item).
Use:
v
to return to the Code Sequence entry screen
h
to step back one menu level.
back
- previous item this menu level
next
- next item this menu level
show
-
show
this
menu
item
03
-
11
then press
save
03
-
12
then press
save
03
-
13
then press
save
03
-
14
then press
save
03
-
15
then press
save
03
-
15
-
01
then press
save
03
-
15
-
01
then press
save
03
-
16
then press
save
START :200 back next chg END :1000 back next chg
XFR_I RECALL:30 back next chg XFR_B RECALL:60 back next chg SLT H_RECALL:1.0 back next chg EKT H_RECALL:1.0 back next chg SLT HOOK_FLASH back next show PBX_A PAUSE :1.0 back next chg
Transfer Recall - Idle: Determines how long a call will stay on exclusive hold at an extension that
has transferred the call to a destination that was idle at the time of the transfer. Prior to the expiration of this timer the call is transfer ringing at the destination. If the destination does not answer the ringing call, the call will begin ringing at the extension that initially transferred the call. Ringing at the transfer destination continues as well. If the timer expires a second time, recall ringing begins at the programmed attendant extension as well. Ringing continues until the call is answered.
Transfer Recall - Busy: The conditions are the same as those above (Idle). This timer is applied
when the transfer destination is busy at the time of the transfer.
Single Line Telephone - Hold Recall: This timer determines how long a call on Common (System)
Hold remains on hold when the extension that placed the call on hold is a SLT.
Electronic Key Telephone - Hold Recall: This timer determines how long a call on Common
(System) Hold remains on hold when the extension that placed the call on hold is an EKT.
Single Line Telephone Hook-switch Flash: This is a compensation timer that allows the
programmer to adjust signaling characteristics of SLT users such that they are properly deciphered by the ICE system. Entries are in milliseconds.
Hook-switch operation
Result
<
"START" time Ignored
>
"START" and
<
"END" Hook-switch Flash signal on port (feature operation)
>
"END" time Disconnect current connection
PBX Auto Pause: When a PBX Line port is connected to an Emerald ICE Trunk port, specific
digit(s) (e.g.. "9") are required to access a PBX Trunk. The Emerald ICE system will automatically insert a pause between the these digit(s) when redial features are invoked.
Page 5-10