Tadiran Telecom EMERALD ICE, Quick Installation Manual

Page: 86 / 138

Emerald ICE Quick Installation Guide
menu tree
_ bksp save chg
Code Sequences
(listed at the left side of
every page/data item).
Use:
v
to return to the Code Sequence entry screen
h
to step back one menu level.
back
- previous item this menu level
next
- next item this menu level
show
-
show
this
menu
item
03
-
45
then press
save
03
-
46
-
then press
save
03
-
46
-
01
then press
save
03
-
46
-
02
then press
save
03
-
46
-
03
then press
save
03
-
46
-
04
then press
save
03
-
46
-
05
then press
save
03
-
46
-
06
then press
save
RPT-TONE TIME:70 back next chg RPT-INTER DGT:70 back next chg START DGT: A back next chg END DGT: C back next chg DTR-TONE TIME:40 back next chg DTR-INTER DGT:40 back next chg
CID RPT MOD:FSK back next chg DTMF CID back next show
Caller ID Repeater Modulation: This system-wide programming item determines how CID data will be
modulated (sent) on analog ports (SLT). (Range: FSK/DTMF; Default: FSK)
DTMF CID - This programming item is directly related to the CID Repeater function. It allows the
programmer to setup
handshaking rules
between the analog port that will repeat the CID signal and the
CID receiving device. This is necessary primarily for voice processors connected to ICE system analog ports. This programming item is relevant only when the CID RPT MOD is set for DTMF operation.
Start Digit: The Start Digit is that DTMF selection which will alert the
connected device (voice processor) that CID data is coming. (Range: 0~9,
∗
, #, A, B, C, D; Default: A)
End Digit: The End Digit is that DTMF selection which will alert the
connected device (voice processor) that CID data sending is complete. (Range: 0~9, *, #, A, B, C, D; Default: A)
DTMF Tone Receiver - Tone Time: The minimum duration of DTMF Tone that
must be detected by the DTMF receiver in FSK mode to be processed by the ICE system. (Range: 30, 35, ...90 milliseconds; Default 40 milliseconds)
DTMF Tone Repeater - Inter-Digit time: The minimum time between DTMF
digits received by the system DTMF receiver to be processed as no-tone- present (Range: 30, 35, ...90 milliseconds; Default 40 milliseconds)
DTMF Repeater Tone - Tone Time: The minimum duration of DTMF Tone that
will be sent by the DTMF sender in FSK mode. (Range: 30, 40, ...90 milliseconds; Default 80 milliseconds)
DTMF Repeater Tone - Inter Digit time: The minimum duration of DTMF Tone
that must be received by the DTMF received to be processed in FSK mode. (Range: 30, 40, ...90 milliseconds; Default 80 milliseconds)
Page 5-16