SKY
-
34
-
7.10.2 Wiring the Outdoor Unit
Fig. 7-13
•
Remove the outdoor unit side cover.
•
Connect the wires to the terminal block male-female, in accordance with the color coding,
as shown in Fig. 7-11.
•
Connect the outdoor sensor cable, making sure the connector is properly inserted.
•
Secure the inter-unit electrical cable to the outdoor unit using the clamp.
•
Make sure that all screws and wires are properly fastened. Loose wires or connections can
cause damage and present a fire hazard!
•
Reassemble the side cover.
7.11 Finishing the Job
•
Hide the tubing wherever possible.
•
Make sure that the drainage tube slopes downstream along its entire length.
•
Insulate tubing connections with the insulation materials supplied.
•
Fasten tubes to the outside wall.
•
Seal the hole through which the cables and tubing are passing.
•
Connect the air conditioner to the power source. Check all air conditioning operating
modes. Consult the user manual.
PLUG TO CONNECT
INTER -UNIT
ELECTRICAL CABLE
CLAMP
W ITH OUTDOOR
SENSOR CABLE (Th3)
Summary of Contents for ANL-100
