TAD TAD-D700, Owner'S Manual

Page: 15 / 112

15
English
TAD-D700
connecting up
CAutION
'
Do not turn on the power switch to the unit or the other components until all connections have been completed.
'
When connecting components or changing connections, always set the power switch to OFF and disconnect the power
cord from its AC outlet. When making connections, connect the power cord last.
1. use the supplied DC cords to connect the main unit to the power unit.
2. Connect other components.
3. Connect the supplied power cord to the unit’s AC IN connector.
4. Connect the power cord to a standard electrical outlet (uSA: AC 120 V; Europe: AC 220 - 240 V).
Power cord
(supplied)
To AC
Power outlet
Power unit Main unit
DC cords (supplied)
When connecting the DC cable,
press the cable’s DC plug into the
connector firmly, then rotate the
locking ring to secure the
connection.
Select one of these connection methods.
INPUT
(UNBALANCED)
INPUT
(BALANCED)
OUTPUT
(COAXIAL)
Select one of these connection methods.
OUTPUT
(BALANCED)
Component with
digital input connector
Pre-Amplifier
Component with
digital output connector
(D/A converter, etc.)
XLR balanced
cable
(commercially
available)
RCA cable
(commercially
available)
Coaxial cable
(commercially
available)
OUTPUT
(COAXIAL)
OUTPUT
(BALANCED)
XLR
D1
DC2 DC1
R
UNBALANCED
BALANCED
L
R L XLR
DIGITAL INPUT
DC INPUT
COAXIAL
D2
DIGITAL OUTPUT
ANALOG OUTPUT
1 2
3
DC2
POWER
ON
OFF
AC IN
DC1 DC OUTPUT
L R
L R
1
2
3
1
2
COAXIAL