TAD TAD-D700, Owner'S Manual

Page: 12 / 112

12
Power unit rear panel / Main unit rear panel
DC2
POWER
ON
OFF
AC IN
DC1 XLR
D1
DC2 DC1
R
UNBALANCED
BALANCED
L
R L XLR
DIGITAL INPUT
DC INPUT
COAXIAL
D2
DIGITAL OUTPUT
ANALOG OUTPUT
COAXIAL
1 2
3
DC OUTPUT
2 4 6 3 7
5
1
1 Main power switch (POWER ON/OFF)
Use to switch main power ON/OFF. Press upper side to turn power ON, then press the

button on the remote control or
main unit to set the unit to standby/ON mode. Press the lower side of this switch to turn the main power OFF.
2 AC IN connector
Connect the supplied power cord here.
3 DC OutPut connectors (DC1/DC2)
Connect the supplied DC cord to the main unit.
4 DIgItAL INPut connectors
Connect to a component equipped with a digital output connector.
• XLR (balanced) type (D1)
• COAXIAL type (D2)
5 DIgItAL OutPut connector
Connect to a component equipped with a digital input connector.
• XLR (balanced) type
• COAXIAL type
6 DC INPut connectors (DC1/DC2)
Connect the supplied DC cord to the power unit.
7 ANALOg OutPut connectors
Connect to Pre-Amplifier.
• UNBALANCED RCA type
• BALANCED XLR type
Power unit Main unit